Faults: ice maker freezing, fridge not cooling, water pooling under the drawers. Do: unplug for a few minutes and check the door seal. Don't: chip ice off the maker with a knife — you'll puncture the lines.

Faults: UE/UB unbalanced errors, a drum that won't spin, or a leak-sensor halt mid-cycle. Do: redistribute the load and clean the drain filter. Don't: keep restarting a loud spinning drum — a worn bearing only gets worse.

Faults: tumbles but no heat, very long drying times, or a burning smell. Do: empty the lint trap every load and check the outside vent flap. Don't: run it again if you smell scorching — a blocked vent is a real fire risk.

Faults: LC leak code, water left standing, or dishes coming out gritty. Do: clean the filter and spray arms, and run a hot rinse. Don't: ignore an LC/leak warning — water reaching the base pan can trip the pump.

Faults: a burner that won't heat, an induction zone that won't detect a pan, or sticky touch controls. Do: wipe the surface dry and use flat-bottomed cookware. Don't: keep flipping the breaker on a dead element — a failed relay can damage the control board.

Faults: won't reach temperature, bakes unevenly, or a fault code on the display. Do: note the exact error code and let it fully cool before a reset. Don't: run a self-clean cycle to "fix" it — the heat often kills the failing sensor.