Faults: SY EF evaporator-fan error, freezer frosting up while the fridge stays warm, or a noisy auto-defrost. Do: pull it off the wall and vacuum the rear condenser coils. Don't: pack food against the back vents — it chokes the airflow and freezes the coil solid.

Faults: E10/E20 fill or drain errors, a musty front-load smell, or water left in the drum. Do: clear the drain-pump filter and run a tub-clean cycle with the door left ajar. Don't: overdose the detergent — excess suds trip the E20 fault and rot the door gasket.

Faults: heats but clothes stay damp, a loud squeal from a worn drum roller, or it shuts off early. Do: clean the lint screen and clear the full vent run to the wall. Don't: ignore a rhythmic thump or squeal — a failing roller can seize and crack the drum.

Faults: i40/iC0 control codes, won't drain, or detergent door stuck shut. Do: clean the filter basket and check the drain hose isn't kinked behind the unit. Don't: force the latch on a stuck door — you'll snap the spring and jam the whole mechanism.

Faults: a coil element that won't heat, a burner stuck on high, or clicking that never lights. Do: reseat the plug-in element in its receptacle and keep igniter caps dry. Don't: run a burner that's stuck on full — a welded switch is a burn risk; cut the power and call us.

Faults: F10 runaway-temp code, a glowing bake element that won't ignite gas, or a door locked after self-clean. Do: write down the F-code and cut power for a minute to clear the lock. Don't: rely on self-clean to fix heat issues — it spikes the temperature and burns out the control board.